Integrated Lights Out Manager (Ilom) 3.0 Cli Procedures Guide - Fujitsu SPARC Enterprise T5140 Product Notes

Sparc enterprise
Hide thumbs Also See for SPARC Enterprise T5140:
Table of Contents

Advertisement

Integrated Lights Out Manager (ILOM) 3.0
CLI Procedures Guide
Erroneous Default Value for /SP/clients/dns
The default value for /SP/clients/dns indicated on page 29 and page 144 is incorrect. The
correct value is "enabled."
Erroneous Description in "Collect SP Data to Diagnose
System Problems" (CR 6806800)
The following description in the section "Collect SP Data to Diagnose System Problems" on
page 88 includes incorrect information.
Variable
URI
Service Snapshot utility does not support the SP data collection using TFTP.
58
SPARC Enterprise T5140 and T5240 Servers Product Notes • November 2012
Option
Description
Any valid target
Specifies the URI of the target directory. The URI format is as
directory location
follows:
protocol://username:password@host/directory
Where protocol can be one of these transfer methods: SFTP,
TFTP, or FTP.
For example, to store the snapshot information in the directory
named data on the host, define the URI as follows:
ftp://joe:mypasswd@host_ip_address/data
The directory data is relative to the user's login, so the
directory would probably be /home/joe/data.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sparc enterprise t5240

Table of Contents