Erroneous Description about Collecting SP Data
The following description in the section "Collect SP Data to Diagnose System Problems" on
page 88 includes incorrect information.
Variable
Option
data
full
On the SPARC Enterprise T-series servers, when you specified the full option, the host in
execution will not be reset. While the host is executing, you can specify the full option.
Complement to the Description Regarding Diagnostics
Trigger
In "Specify the Diagnostics Trigger," the following description is missing.
The Solaris OS restart using the Solaris OS shutdown command or the reset on OpenBoot
PROM never runs diagnostics (POST). If you want to run POST, you need to perform system
reset (reset /SYS) or system power off/on (stop /SYS, start /SYS) from ILOM.
Notes on Downloading System Firmware
For the information on how to get the patch releases, contact your sales representative.
Description
Specifies that all data is to be collected ("full" collection).
Note - Using this option may reset the running host.
Chapter 4
Documentation Errata
59