Fujitsu SPARC Enterprise T5140 Product Notes page 50

Firmware and General Software Issues (Continued)
TABLE 3-4
CR ID Description
6835866 The value of power consumption shown by
/SYS/VPS (/SYS/VPS value) may exceed the
6857524
threshold value. At this time, an event log as shown
6858176
below will be collected.
Event log example:
4368 Mon Jun 29 23:53:39 2009 IPMI
Log
ID =
23:53:39 : Power Unit : /SYS/VPS : Upper
Critical going high : reading 1480.90 >
threshold 1215.40 Watts
And when the power consumption value (/SYS/VPS
value) has come back to under the threshold, it may
display an abnormal value.
Abnormal value display example:
4369 Mon Jun 29 23:54:28 2009 IPMI
Log
ID =
23:54:28 : Power Unit : /SYS/VPS : Upper
Critical going low
threshold 1215.40 Watts
6823561 In the back up and restore functions of ILOM
settings, you cannot set "https" to the protocol for
data transfer (transfer_method property).
Example:
-> set dump_uri=
https://ipaddres/directory/filename
set: Unable to transfer image,
please check URI
40 SPARC Enterprise T5140 and T5240 Servers Product Notes • November 2012
major
e1f : 06/29/2009 :
minor
e20 : 06/29/2009 :
: reading 0 <
Workaround
None.
The value of power consumption shown by
/SYS/VPS is given as an indication.
For the right value of power consumption, see
/SP/powermgmt/actual_power.
Therefore, the collected event log can be safely
ignored.
None.
Use other protocols (tftp, ftp, sftp, scp, http).