Fujitsu SPARC Enterprise T5140 Product Notes page 90

0:0:0>POST enabling CMP 0 threads: ffffffff.ffffffff
0:0:0>VBSC mode is: 00000000.00000001
0:0:0>VBSC level is: 00000000.00000001
0:0:0>VBSC selecting Normal mode, MAX Testing.
0:0:0>VBSC setting verbosity level 2
0:0:0>Basic Memory Tests....Done
0:0:0>Test Memory....Done
0:0:0>Setup POST Mailbox ....Done
0:0:0>Master CPU Tests Basic....Done
0:0:0>Init MMU.....
Fault | critical: SP detected fault at time Mon Jan 18 08:45:10 2010. /SYS/PADCRD
prom is unreadable or corrupted
0:0:0>NCU Setup and PIU link train....Done
0:0:0>L2 Tests....Done
0:0:0>Extended CPU Tests....Done
0:0:0>Scrub Memory....Done
0:0:0>SPU CWQ Tests...Done
0:0:0>MAU Tests...Done
0:0:0>Network Interface Unit Tests....Done
0:0:0>Functional CPU Tests....Done
0:0:0>Extended Memory Tests....Done
2010-01-18 08:46:50.299 0:0:0>INFO:
2010-01-18 08:46:50.302 0:0:0>
2010-01-18 08:46:50.307 0:0:0>POST:
2010-01-18 08:46:50.310 0:0:0>Master set ACK for vbsc runpost command and spin...
Chassis | major: Host is running
SPARC Enterprise T5240, No Keyboard
Copyright 2009 Sun Microsystems, Inc.
OpenBoot 4.30.6, 8064 MB memory available, Serial #85367270.
Ethernet address 0:21:28:16:99:e6, Host ID: 851699e6.
{0} ok
This event occurs in case you power off the system and remove the power cord in a short
period of time, or in case you remove and insert the power cord in a short period of time.
When the above time period is too short, the ILOM internal process does not complete
normally.
When this event occurred, perform the following procedure. After you restored using this
procedure, you do not need to replace the component.
80 SPARC Enterprise T5140 and T5240 Servers Product Notes • November 2012
POST Passed all devices.
Return to VBSC.
All rights reserved.