Incorrect Ilom Command Related To Ip Address Assignment; Errors In The Integrated Lights Out Manager (Ilom) 3.0 Cli Procedures Guide; Erroneous Description In "Collect Sp Data To Diagnose System Problems"(Cr 6806800) - Fujitsu SPARC ENTERPRISE T5440 User Manual

Hide thumbs Also See for SPARC ENTERPRISE T5440:
Table of Contents

Advertisement

Incorrect ILOM Command Related to IP Address
Assignment
The ILOM commands indicated on page 23 and page 28 include an erroneous
information.
setpendingipdiscovery= should be set pendingipdiscovery=.
Errors in the Integrated Lights Out
Manager (ILOM) 3.0 CLI Procedures Guide
Some information in the Integrated Lights Out Manager (ILOM) 3.0 CLI Procedures
Guide is incorrect. The following sections provide the corrections.
Erroneous Description in "Collect SP Data to
Diagnose System Problems"(CR 6806800)
The following description in the section "Collect SP Data to Diagnose System
Problems" on page 88 includes incorrect information.
Variable
URI
Service Snapshot utility does not support the SP data collection using TFTP.
50
SPARC Enterprise T5440 Server Product Notes • November 2009
Option
Description
Any valid target
Specifies the URI of the target directory. The URI format
directory location
is as follows:
protocol://username:password@host/directory
Where protocol can be one of these transfer methods:
SFTP, TFTP, or FTP.
For example, to store the snapshot information in the
directory named data on the host, define the URI as
follows:
ftp://joe:mypasswd@host_ip_address/data
The directory data is relative to the user's login, so the
directory would probably be /home/joe/data.

Advertisement

Table of Contents
loading

Table of Contents