Boot Up
Click Download to initiate the download.
Download Firmware From HTTP
This window is used to download firmware from a computer to the Switch and updates the switch.
The fields that can be configured are described below:
Parameter
Destination File
Source File
Click Download to initiate the download.
Upload Firmware
The following window is used to upload firmware from the Switch.
Upload Firmware To TFTP
This window is used to upload firmware from the Switch to a TFTP Server.
The fields that can be configured are described below:
Parameter
TFTP Server IP
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Select this option to use this firmware as the boot-up firmware.
Figure 12-6 Download Firmware – HTTP window
Description
Enter the file name that will be stored in the flash of the Switch, e.g. C:\runtime.had.
Enter the location of the Source File, e.g. runtime.had, or click the Browse button to
navigate to the firmware file for the download.
Figure 12-7 Upload Firmware – TFTP window
Description
Enter the TFTP server IP address used.
IPv4
Click the radio button to enter the TFTP server IP address used.
IPv6
Click the radio button to enter the TFTP server IPv6 address used.
341