Ip Forwarding Table - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear:
The fields that can be configured are described below:
Parameter
Policy Route Name
Profile ID (1-6)
Access ID (1-256)
Next Hop IPv4 Address
State
Route Preference
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.

IP Forwarding Table

The IP forwarding table stores all the direct connected IP information. On this page the user can view all the direct
connected IP information.
To view the following window, click L3 Features > IP Forwarding Table, as show below:
Figure 5-7 Policy Route Settings window
Description
Enter a name of no more than 32 alphanumeric characters that will be used to identify this
policy route.
Enter the Profile ID number of the Access Profile, previously created, which will be used to
identify packets as following this Policy Route. This access profile, along with the access
rule, must first be constructed before this policy route can be created.
Enter the Access ID number of the Access Rule, previously created, which will be used to
identify packets as following this Policy Route. This access rule, along with the access
profile, must first be constructed before this policy route can be created.
This is the IP address of the Next Hop router that will have a direct connection to the
gateway router connected to the Internet.
Use the pull-down menu to enable or disable this Policy Route.
Select the route preference used here. Options to choose from are Default and BPR.
192