Spotlight Connection - Beech ovens REC Series Installation And Operation Manual

Beech Ovens
RND-REC-RGO Manual (R1)

Spotlight Connection

For those ovens fitted with a spotlight, there will be a cable from the main control
cabinet that must be connected in order for the spotlight to function. The cable will be
coiled on the back of the control cabinet and provision for running the cable (clamps and
holes cut in oven body where required) to the spotlight fitting has already been made.
All installation and connection of electrical cabling should be carried out by a
licensed electrician.
NOTE: Ensure adequate access is provided in the oven façade to allow access
to the spotlight cover panel for future service and maintenance. Without
external access, the glass and spotlight globe cannot be replaced.
Spotlight Body (Globe inside)
Remove to replace globe
1
Spotlight access cover
panel
Page 63
Confidential and Proprietary
2
28/07/2011 (C)
Cable from control
cabinet