Table of Contents
Advertisement
Beech Ovens
RND-REC-RGO Manual (R1)
Connection Procedures
Mount the stainless steel gas control cabinet to the brackets supplied. (Usually on the
front leg of the oven, or hanging from the front base strut with two (2) angles) There is a
key supplied to open the Gas control cabinet
door. Be sure to keep this key in a safe place.
Gas Control box as seen from
rear of oven.
(In this instance, mounting
bracket attached to RH side leg)
12.25mm SS pipe
NOTE: When fitting the Tube burner, the inspirator's position may be swivelled to best
accommodate the SS pipe length by loosening the bolts on the mounting flange. Be
sure to tighten the bolts when positioning is final.
Page 53
Confidential and Proprietary
Connect the 12.25mm stainless steel pipe
supplied, from the Combination Gas valve
to the burner/ inspirator. No sealant is
required on this type of connection.
Tube burner mounting flange
Inspirator
28/07/2011 (C)
Hide quick links:
Advertisement
Table of Contents
