Site Preparation - Beech ovens REC Series Installation And Operation Manual

Beech Ovens
RND-REC-RGO Manual (R1)

Site Preparation

Once on the ground, the method of installation is dependent on the type of access. If
there is level access of sufficient width e.g. 1600mm (in the case of the round RND
1300 model) and no stairs, the oven can be moved by pallet trolley or forklift to its
desired location.
In the case where
navigating through narrow corridors and
stairs, both halves of the oven must be
individually placed on their edge on a pallet
trolley (or similar) and moved through the
narrow passages.
(Be sure to secure the oven to the trolley
during transportation
strapping)
The oven top and base will fit into a standard elevator. Be sure to check elevator load
capacity is adequate.
For installation purposes, we utilize thick sheets of ply to spread the weight of the oven
when we transport it over any surface which may be damaged by the wheels of the
trolley.
Page 12
access includes
using ropes or
28/07/2011 (C)
Confidential and Proprietary
Min 700mm
Leave timber supports on base
when transporting