Table of Contents
Advertisement
Beech Ovens
RND-REC-RGO Manual (R1)
To remove the Tri-electrode
assembly, loosen and remove
the two (2) Phillips head
screws holding the Tri-
electrode.
Note: The Tri-
electrode is mounted
in a ceramic base
and is easily cracked if not
handled correctly. Always
check for cracks when
servicing this component.
Carefully remove the Tri-electrode and gently remove any
debris which may have built up around the Tri-electrode using a soft brush or rag.
Note: Be sure not to adjust the positioning of the Tri-electrode probes.
Positioning of these probes is critical for the correct function of the gas
system. See next page for correct positioning details.
Page 104
Phillips head screws
28/07/2011 (C)
Confidential and Proprietary
As general maintenance, clear
any debris that may have
accumulated in the base of
blow back chute.
Hide quick links:
Advertisement
Table of Contents
