Table of Contents
Advertisement
Beech Ovens
RND-REC-RGO Manual (R1)
When fitting the ceramic insulation wool to the oven, be sure that the wool is firmly in
place and that all air pockets are removed. The glue will dry in approximately one (1)
hour depending on ambient conditions.
The oven is now ready to be moved carefully and exactly into its final position, using the
lifting frame and a pallet trolley (or similar).
Using a spirit level or similar, ensure that the oven floor is level.
25mm Air Circulation Gap
If required, fasten the legs to the
floor using approved fasteners for
the specific type of floor material.
NOTE: Fully assembled the oven can be extremely heavy. Be sure to use suitable lifting
equipment when moving to final position.
NOTE: A 25mm Air Circulation Gap is to be left between the ceramic wool
and any surface surrounding the oven after final installation. Failure to leave
this air gap will result in above normal temperatures being transferred to
exterior surfaces, causing a fire hazard.
Page 19
Confidential and Proprietary
28/07/2011 (C)
Hide quick links:
Advertisement
Table of Contents
