Table of Contents
Advertisement
Beech Ovens
RND-REC-RGO Manual (R1)
Task to be performed
Item
Visually check and clean any foodstuff, dirt or deposits from
8
burner with a suitable small brush. Take care not to damage
the tri-electrode over burner.
Carry out a comprehensive check of the oven, gas system
and exhaust, including spray filter (or flue transition) and
9
ductwork. Check that approved and inspected fire
extinguishing equipment is in close proximity to the oven.
Check correct exhaust airflow calibration and temperature at
the exhaust spigot over the oven mouth, using the A4 paper
test method. Adjustment of damper should not be
10
necessary, unless restaurant / kitchen conditions have
changed. Having the correct draw at oven mouth is critical to
performance.
Inspect and clean out oven extraction flue and ductwork, to
remove any accumulation of creosote, soot and grease
11
which may have occurred. If accumulation is present, it
should be removed to reduce the risk of fire. Ensuring
extraction ductwork is kept clean, will reduce the risk of fire.
Check and verify correct operation of gas interlock system.
When exhaust fan is switched off, the thermocouple probe in
12
exhaust duct should register a rise in temperature and shut
off the gas supply to oven burners.
Inspect high temperature cables from control box to burner
head and tri-electrode device. Ensure insulation is in good
13
order especially where cables may cross over metal
framework. Check cables at burner and end for any sign of
burning.
Page 101
Performed by
Daily
Oven Operator
Oven Operator
Technician
Technician
Technician
Technician
Technician
28/07/2011 (C)
Confidential and Proprietary
Frequency
3
Weekly
Monthly
Months
6
Months
Hide quick links:
Advertisement
Table of Contents
