Beech ovens REC Series Installation And Operation Manual page 108

Beech Ovens
RND-REC-RGO Manual (R1)
Incorrect positioning of the Tri-electrode is also a common cause of erratic Gas
System operation with the Display burner.
Correct positioning: A spark is
generated at the Spark point.
Note: Be sure to check that all Gas lines, cabling and bolts are correctly
assembled and secured before turning on power and gas for re-start.
Page 107
Confidential and Proprietary
Carefully lower the Display burner
from the oven base. Be sure not to
bump the position of the Tri-
electrode when removing and
replacing the burner.
With the Display burner removed the
Tri-electrode and/or burner can be
cleaned and/or adjusted.
Connect the leads securely to the
Tri-electrode correctly and be sure
that it is correctly adjusted before re-
assembly.
Incorrect positioning: A spark is
generated between the Flame
Ignition probe and the burner body.
28/07/2011 (C)