Transportation - Beech ovens REC Series Installation And Operation Manual

Beech Ovens
RND-REC-RGO Manual (R1)

Transportation

Take the Oven to the site.
Lift the Upper section from truck using hotel crane or
mobile crane of sufficient capacity.
Move the Upper section to kitchen. (Remove
from pallet and place on it's side on pallet
trolley if it must go through narrow doorways -
See previous section - Lifting Positions)
Lift the Base section from truck using hotel crane or mobile crane of sufficient capacity.
(Remove from pallet and place on its side on pallet trolley if it must go through narrow
doorways - See previous section - Lifting Positions)
Do NOT remove plywood from top of Base.
Now lift the Base onto pallet trolley. (On i's
side if it must go through narrow doorways:
See previous section - Lifting Positions)
Remove legs from oven base to reduce its
width if necessary.
Carefully move this section of oven to
location (re-attach legs firmly with supplied
bolts if transported on its side).
Page 15
Confidential and Proprietary
Carefully remove the equipment stored
beneath the Base and store in a secure
location (ready for later assembly).
28/07/2011 (C)