Window Installation - Beech ovens REC Series Installation And Operation Manual

Beech Ovens
RND-REC-RGO Manual (R1)

Window Installation

From July 2010, Beech Ovens have introduced a new design for the viewing window
assembly. This new design is to ensure that the outer surface temperature of the
viewing glass is safe to touch and the surrounding façade materials do not damage from
excess heat transfer from the viewing window.
To ensure the window is not damaged in transit, it is packed separately to the oven.
The diagram below illustrates how the viewing window is fitted into the oven.
NOTE: Be careful not to damage the edge of the glass on the steel frame of
the window.
Once unpacked, the outer glass assembly needs to be removed from the window.
Remove the top 2 plastic caps ONLY.
Do NOT remove the bottom 2!
Remove the top 2 screws using a 4mm
hex key.
NOTE: Hold the glass in place so it
doesn‟t fall outwards.
Page 59
Confidential and Proprietary
28/07/2011 (C)