Beech Ovens
RND-REC-RGO Manual (R1)
Spray Filter Connection
The diagram below shows the connection location for the spray filter services.
The services details are outlined in the Spray Filter – Technical Specifications
section of this manual.
Electrical Connection
(To be interlocked with
exhaust fan)
Water Connection
(½" (15mm) Connection)
When installing the Spray Filter, be sure to remove any packing tape holding the filter in
place. Loosen the nuts on the top access panel and remove the panel. Remove the
packing tape and making sure that the filter is securely in its correct position (as shown
below) replace the access panel.
Packing tape
Page 58
Confidential and Proprietary
Exhaust Connection
(300mm x 300mm standard
duct flange)
Waste Water Connection
(11/2" Connection)
Access panel
28/07/2011 (C)
Cool Air Make-up
(Ensure a fresh air
source is available)