Table of Contents
Advertisement
Beech Ovens
RND-REC-RGO Manual (R1)
Display Burner
When using a Display burner, wood fuel should NOT be used. However, foodstuffs
and other debris can disrupt the correct operating function of the Tri-electrode on a
Display burner.
If access is not possible through the door, the entire Display burner assembly can be
removed through the base of the oven.
To remove the Display burner,
loosen and remove the four (4)
bolts in the rear support of the
oven base.
Should the burner require
cleaning, remove the gas line
into the burner. This is a flared
connection and does not
require sealant.
Check the condition of the blue
high tension/temperature leads
and insulting sleeve to the Tri-
electrode. Replace if
necessary.
Page 106
Confidential and Proprietary
If the oven is cold and access is
possible, in some cases the Display
burner can be accessed through the
door of the oven. The Tri-electrode is
directly behind the burner shroud.
28/07/2011 (C)
Hide quick links:
Advertisement
Table of Contents
