Spray Filter Maintenance - Beech ovens REC Series Installation And Operation Manual

Beech Ovens
RND-REC-RGO Manual (R1)

Spray Filter Maintenance

Maintenance of the Spray Filter should occur regularly and in accordance with the
maintenance schedule as listed above. General maintenance consists of the
following:
 Remove and clean the cyclonic filter
 Clean / replace the spraying nozzles and filters
 Check the cool air inlet mechanics are free moving
 Check / replace the in-line "Y" filter/strainer
 Clean the damper blade and clean internals of the main body
 Check that the solenoid is functioning correctly
 Check overall condition – check for signs of water or soot leakage
Do NOT remove entire
nozzle assembly – hold
when undoing retaining
nut
Remove and clean the
Cyclonic Filter (access from
above)
Remove and clean "Y" strainer and
check solenoid is functioning correctly
Page 112
Confidential and Proprietary
Clean the Damper blade and
main body internals (Access
from rear panel)
28/07/2011 (C)
Remove tip of nozzle and
internal strainer ONLY by
undoing the retaining nut –
Do NOT remove entire
assembly
Check Cool air make-up
device flap is free moving
and clean