Advertisement
Changing the TBR0500 from Charcoal to Gas
Removing the Charcoal plug
1. Open the Control Cabinet door
2. Remove the 2 screws that hold the plug in place
3. Slide the plug out
Control Cabinet Door
Page 1 of 2
Remove the 2 screws holding the
plug in place and slide plug out
2009-11-13 (C)
Advertisement
Table of Contents
Related Manuals for Beech ovens TBR0500
Summary of Contents for Beech ovens TBR0500
- Page 1 Page 1 of 2 2009-11-13 (C) Changing the TBR0500 from Charcoal to Gas Removing the Charcoal plug 1. Open the Control Cabinet door 2. Remove the 2 screws that hold the plug in place 3. Slide the plug out Remove the 2 screws holding the...
- Page 2 TBR0500 - Changing from Charcoal to Gas Instruction.doc Page 2 of 2 Removing the Gas system Turn off and disconnect the gas line from the inlet to the cabinet 2. Open the Control Cabinet door 3. Remove the 2 nuts holding the valve bracket in place 4.
Need help?
Do you have a question about the TBR0500 and is the answer not in the manual?
Questions and answers