Forms Tear Off
1.6.15 Paper Loading
Auto Bail Arm for Auto Loading
1.6.16 Paper Out Detection
Distance from end of paper
Rear Feed: 2.30 inches (58.42 mm)
Bottom Feed: .94 inches (23.88 mm)
Cut Sheet: .93 inches (23.62 mm)
1.6.17 Paper Tear Capabilities
Form Tear-Zero Tear
Metal Tear Bar
1.6.18 Print Method
Printhead Type
General Information
Impact, Dot Matrix
Staggered, 9 pin, stored energy printhead
0.36 mm diameter pins
Installed by Service Technician
The Printhead Gap Adjustment must be performed when the printhead is replaced.
Overheat Protection
When the printhead temperature reaches 115 degrees Celsius, the printer stops bi-directional printing. Uni-directional printi
If the temperature continues to rise (125° Celsius), printing stops.
Printing will resume when the printhead temperature drops below 115 degrees Celsius.