OKIDATA Pacemark 3410 Service Manual page 119

Group
Bottom Feed
Page Width
Page Length
Item
Line Spacing
Form Tear Off
Skip Over Perforation
Page Width
13.6" 8"
11 " 11 2/3" 12" 14"
17" 3" 3.5" 4" 5.5"
6" 7" 8" 8.5"
Setting
6 8 LPI
OFF 500 mS 1 sec
2 sec
No Yes
13.6" 8"
The 8" setting emulates
a narrow carriage
printer. If 8.5" paper is
always used choose
this setting to prevent
printing on the platen.
Notes
Sets the distance
between line in lines
per inch.
Activate the form tear
off feature by selecting
a time for the printer to
wait after data before
advancing the page to
tear-off. If the software
pauses during printing
print registration may
be disrupted. Select a
longer time or
deactivate this feature.
Refer to the Printer
Handbook.
When set to YES the
printer advances the
paper 1 inch (when
reaching the bottom of
the page) to the next
top of form. Use ONLY
for unformatted listings
or programs that don't
format the page.
The 8" setting emulates
a narrow carriage
printer. If 8.5" paper is
always used choose
this setting to prevent
printing on the platen.