Page: 58
Service Guide PM3410
Chapter 3 Maintenance & Disassembly
3.2.24 Space Motor Assembly
1. Remove the ribbon feed assembly (3.2.23).
2. Loosen the two belt pulley bracket mounting screws (1). While pushing the belt pulley bracket to the left
(A), temporarily tighten the two screws. This will ease the tension on the space belt.
3. Remove the three space motor mounting screws (2).
4. Remove the space motor (3) by pulling toward the front of the printer.
P/N 56506204 Motor: Space RSPL B.2.06