Page: 96
Service Guide PM3410
Chapter 4 Failure & Repair Analysis
4.4.04 Tips for Preventing Image Problems
1. Make sure that the ribbon is not "dried out". If the printer output is faded, install a new ribbon, then print
another sample.
2. Make sure that the paper you are using is within specifications. Paper specifications can be found in
Section 1 of this Service Handbook.
3. Always place the Head Gap Lever in the position appropriate for the paper that you are using.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)