Page: 95
Service Guide PM3410
Chapter 4 Failure & Repair Analysis
4.4.03 START HERE Flowchart
START
Does the failure occur immediately after the unit is powered ON?
YES Which of the following resembles the problem?
Power is not supplied to the printer
Refer to RAP 01
No spacing operation
Refer to RAP 02
ALARM lamp is blinking
Refer to Section 4.6
NO The problem occurs during printing.
Refer to the RAP Index - Section 4.7
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)