Page: 60
Service Guide PM3410
Chapter 3 Maintenance & Disassembly
3.2.26 Sensor Board (LPRW)
(3.2.07).
1. Remove the printer mechanism
2. Disconnect connectors CN1 and CN2 (1) from the sensor board (2).
3. Raise the front of the printer mechanism.
4. Remove the three sensor board mounting screws (3).
5. Disconnect connector CN3 (4) and detach the sensor board.
P/N 55061501 PCB: LPRW Sensor RSPL B.2.06
P/N 56616804 Cable: Sensor Board Connection RSPL B.2.06
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)