Space Belt - OKIDATA Pacemark 3410 Service Manual

Page: 59
Service Guide PM3410
Chapter 3 Maintenance & Disassembly

3.2.25 Space Belt

(3.2.01)
1. Remove the printhead
2. Remove the space motor assembly (3.2.24)
3. Remove the mounting screw and detach the connector clamp (1). Detach the head cable assembly (2)
from the carriage.
4. Remove the mounting screw (3) and detach the belt clamp (4).
5. Remove the belt pulley (5) from the bracket (6) and detach the space belt (7).
P/N 50702301 Belt Clamp B.2.05
P/N 51303101 Belt: Mini Pitch (Spacing) RSPL B.2.05