OKIDATA Pacemark 3410 Service Manual page 111

6. Place the Head Gap Lever Adjustment Sticker on the tear bar of the access cover.
7. Fill out the Customer Warranty Extension Card (if applicable).
Read Me First
The Read Me First Sheet in the Pacemark 3410 Replacement Printhead Kit reads as follows.
When changing paper paths or paper type, be sure to adjust the printhead gap lever. This blue lever is
located on the right hand side of the printer. Failure to correctly adjust this lever could result in damage to
the printhead.
Key Combination
PRINT QUALITY + CHARACTER PITCH (Either
during ON-LINE or hold during power ON)
SELECT + FORM FEED (Hold during power ON)
SELECT + LINE FEED (Hold during power ON)
SELECT + TOP OF FORM (Hold during power
ON)
LINE FEED (Hold during power ON)
FORM FEED (Hold during power ON)
90 Day On-Site Warranty Extension
The 90 Day On-Site Warranty Extension in the Pacemark 3410 Replacement Printhead Kit reads as
Function
Menu Mode
Activates Hexadecimal Dump Mode
Resets Printer Menu to factory defaults
Resets Printer Menu and Top of Form to factory
defaults
Activate Font Test To end Font Test press
SELECT
Activate Rolling ASCII Test To end Rolling ASCII
Test press SELECT