Line Feed Belt Tension - OKIDATA Pacemark 3410 Service Manual
Hide thumbs
Also See for Pacemark 3410:
- Service handbook (308 pages) ,
- User manual (273 pages) ,
- Instruction manual (9 pages)
Table of Contents
Advertisement
Page: 68
Service Guide PM3410
Chapter 3 Maintenance & Disassembly
3.3.02 Line Feed Belt Tension
1. Loosen the three line feed motor mounting bolts (1).
2. Using a tension gauge, apply .5 pounds of pressure at Point A.
NOTE:
Rotate the platen pulley at least once before making the adjustment
3. Adjust the line feed motor (2) position to obtain a 1 /16 inch deflection as shown.
4. Tighten the three mounting bolts.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Advertisement
Table of Contents
Troubleshooting
