Table of Contents
Advertisement
Physical Interface
AW00136902000
4.2
FFC Connector
The 28-pin connector on the camera is a flexible flat cable (FFC) connector by Hirose Electric Co.
It is specifically designed for shielded and impedance-controlled flexible flat cables. However,
standard flexible flat cables without a ground layer can also be inserted. They will make good
electrical contact, but under certain circumstances, you will notice a high rate of bit errors.
The connector order code is Hirose FH41-28S-0.5SH(05).
4.2.1
Connector Pin Assignments
Pin 1 Position
As shown in
Figure
19, pin 1 of the FFC connector is indicated by an arrow, and pin 28 is indicated
by the number 28.
Fig. 19: Pin Positions
24
Basler dart BCON
Advertisement
Table of Contents
