Pin Assignments For The 26-Pin Mdr Connector(S) - Basler A400K User Manual

2.1.2 Pin Assignments for the 26-Pin MDR Connector(s)

The 26-pin connector on the camera is a female 0.050 inch MDR connector as called for in the
Camera Link Specification. It is used to interface video data, control signals, and configuration
data. The pin assignments for the 26 pin, MDR connector are given in Table 2-1.
Table 2-2 provides the pin assignments for the second 26 pin, MDR connector that is only present
on A403k and A404k cameras.
(First) MDR Connector:
Pin
Number
1, 13, 14,
1
26
2
15
3
16
4
17
6
19
5
18
7
20
8
21
9
22
10
23
11
24
12
25
1
Pins 1, 13, 14, and 26 are all tied together to Gnd inside of the camera.
Table 2-1: A400k Pin Assignments for the (First) 26-pin MDR Connector
Basler A400k
Signal
Direction
Name
Gnd Input
X0- Output
X0+
X1- Output
X1+
X2- Output
X2+
X3- Output
X3+
XClk- Output
XClk+
SerTC+ Input
SerTC-
SerTFG- Output
SerTFG+
CC1- Input
CC1+
CC2+ Input
CC2-
CC3- Input
CC3+
CC4+ Input
CC4-
DRAFT
Level Function
Ground Ground for the inner shield of the cable
Camera Link Data from Camera Link Transmitter
LVDS
Camera Link Data from Camera Link Transmitter
LVDS
Camera Link Data from Camera Link Transmitter
LVDS
Camera Link Data from Camera Link Transmitter
LVDS
Camera Link Transmit Clock from Camera Link Transmitter
LVDS
RS-644 Serial Communication Data Receive
(SerTC = "Serial to Camera")
RS-644 Serial Communication Data Transmit
(SerTFG = "Serial to Frame Grabber ")
RS-644 ExSync: External Trigger
LVDS
RS-644 ExClk. The input is not supported.
LVDS
RS-644 ExFlash: External Flash Trigger
LVDS
RS-644 Not used
LVDS
Camera Interface
2-3