The Ito Default Operator On Ncr Unix Svr4; System Resources Adapted By Ito On Ncr Unix Svr4 - HP -UX B6941-90001 Administrator's Reference Manual

File Tree Layouts on the Managed-Node Platforms
File Tree Layout on NCR UNIX SVR4 Managed Nodes

The ITO Default Operator on NCR UNIX SVR4

The ITO default operator, opc_op, owns /home/opc_op as home
directory. By default, the operator uses the Bourne Shell (/bin/sh) and
is locked until the passwd(1M) command is executed. User opc_op
belongs to the group opcgrp.
System Resources Adapted by ITO on NCR
UNIX SVR4
ITO makes changes to the following system resource files:
/etc/passwd and /etc/shadow - entry for the default ITO operator
/etc/group - group entry for the default ITO operator
/etc/init.d/opc - ITO startup script
/etc/rc2.d - file S93opc is created
/etc/rc0.d - file K07opc is created
/etc/rc1.d - file K07opc is created
/etc/init.d/ncs - NCS startup script, if not already present
/etc/rc2.d: file S76ncs is created, if not already present
/etc/rc0.d: file K52ncs is created, if not already present
/etc/rc1.d: file K52ncs is created, if not already present
132 Chapter 3