HP -UX B6941-90001 Administrator's Reference Manual page 228

Configuring ITO
Preconfigured Elements
• File KWrites
• Free Redir Area
• KPackets Recvd #min
• KPackets Sent #min
• Memory Monitor
• Packets Recvd #min
• Packets Sent #min
• Queue Wait Time
• Ready Queue Jobs
• Ready Jobs (avg. KB)
• Total Packets Recvd
• Total Packets Sent
• Trend Graph
• Volume Free Space
Applications from this bank execute as user root on the server and make
SNMP GET calls to collect performance data from the NetWare server.
NetWare Tools
The following application icons are available by default in NetWare
Tools window. The user opc_op can execute all of these applications on
the NetWare server except the Xconsole application, which is only used
to run a NetWare console in an X window on the ITO console.
NOTE Note that on NetWare SFT III systems starting applications of the
application group NetWare Tools on the secondary IO Engine can cause
problems, if the secondary IO Engine is already in the state down; the
secondary IO Engine may abend.
Adapters.
Determines I/O port address or interrupt conflicts by
viewing a list of adapters:
Default:
adapinfo <server_name>
Boot the NetWare Server (NCF).
Stops and restarts (cold boots)
the NetWare server, but does not exit the server:
228 Chapter 5