Snmp Configuration On Unix - HP Data Protector A.06.11 Integration Manual

For operations manager for windows
Hide thumbs Also See for Data Protector A.06.11:
Table of Contents

Advertisement

SNMP configuration on UNIX

To enable the Operations Manager Agent on UNIX nodes to receive SNMP traps
from Data Protector:
1.
Execute one of the following commands to set the SNMP mode:
• If an ovtrapd process is running, add:
ovconfchg -ns eaagt -set SNMP_SESSION_MODE TRY_BOTH
• If no ovtrapd process is running, add:
ovconfchg -ns eaagt -set SNMP_SESSION_MODE NO_TRAPD
2.
Configure the SNMP Emanate Agent to send SNMP traps to the local Operations
Manager Agent by adding the following lines to the snmpd.conf file:
HP-UX: /etc/SnmpAgent.d/snmpd.conf trap-dest: 127.0.0.1
Solaris: /etc/snmp/conf/snmpd.conf trap localhost
trap-community public
34
Installing the Data Protector Integration

Advertisement

Table of Contents
loading

Table of Contents