HP -UX B6941-90001 Administrator's Reference Manual page 206

NOTE
NOTE
NOTE
NOTE
Configuring ITO
Preconfigured Elements
If the default user has been changed by the operator, you must supply a
password.
MPE/iX:
Command issued: listspf
Default user: MGR.OVOPR.
Default password: none required, because application is started via
the ITO action agent.
If the default user has been changed by the operator, you must supply a
password.
Windows NT
Print status is unavailable for Windows NT managed nodes.
Processes (UNIX and MPE/iX)
ITO displays the status of the running processes:
UNIX:
Command issued: opcps
(This is a script calling ps -eaf on HP-UX, AIX, Solaris, NCR UNIX
SVR4, SGI IRIX, SCO OpenServer, SCO UnixWare, Digital UNIX
(OSF/1), DYNIX/ptx, Olivetti UNIX, Pyramid DataCenter/OSx, and
SINIX/Reliant.)
Default user: opc_op.
If the default user has been changed by the operator, you must supply a
password.
MPE/iX:
Command issued: showproc; pin=1;system;tree
Default user: MANAGER.SYS, because showproc requires SM
capability.
If the default user has been changed by the operator, you must supply a
password.
Windows NT
206 Chapter 5