File Tree Layout On Mpe/Ix Managed Nodes; Ito Default Operator On Mpe/Ix; System Resources Adapted By Ito On Mpe/Ix; Arpa-To-Ns Node-Name Mapping For Mpe/Ix - HP -UX B6941-90001 Administrator's Reference Manual

Figure 3-6
ACTIONS
COMMANDS
File Tree Layouts on the Managed-Node Platforms

File Tree Layout on MPE/iX Managed Nodes

File Tree Layout on MPE/iX Managed
Nodes
ITO Software on MPE/iX Managed Nodes
BIN
CONF
H
LIB
LOG
During installation, ITO creates the accounts OVOPC and OVOPR. The
group PUB.OVOPC is not used by ITO.

ITO Default Operator on MPE/iX

The default operator, MGR.OVOPR, on MPE/iX is assigned the dummy
group PUB.OVOPR as home group; for this account and group, the
MPE/iX default capabilities and access rights are applied.

System Resources Adapted by ITO on MPE/iX

ITO makes changes to the following system resource files:
SYSSTART.PUB.SYS
ITO agent startup; modification is only done if the Automatic
Update of System Resource Files option has been set.

ARPA-to-NS Node-Name Mapping for MPE/iX

ITO uses the vt3k operation for software (de-)installation purposes and
for a virtual terminal connection from the operator's Application Desktop
or the administrator's Application Bank, to an MPE/iX managed node.
The vt3k operation requires the HP Network Services (NS) node name of
the remote HP 3000. However, nodes selected from the map are
identified by the ARPA hostname. By default, a selected node's ARPA
128
OVOPC
PUB
MSG
MONITOR
Z
TMPMON
TMPCONF
TMPCMDS
TMPACT
TMP
Chapter 3