Table A-7. Default Program File Names For Processes - HP NonStop TMF Programming Manual

TMF Configuration Limits and Defaults
Table A-6. Process Limits and Defaults (page 3 of 3)
Parameter
TMP process type
Number of processes
Extended segment size
Volume recovery process type
Number of processes
Extended segment size
Number of data volumes assigned to
each volume recovery process's work
queue
Delay between the TMP's attempts to
restart a failed TMF process

Table A-7. Default Program File Names for Processes

TMF Process
Audit dump
Audit overflow
Audit restore
Backout
Catalog
File recovery
File recovery list
Online dump
Online restore
TMFMON2
TMP
Volume recovery
HP NonStop TMF Management Programming Manual—540140-008
Limits
1 primary and
1 backup process
See discussion, EXTENDEDSEGSIZE Option
Considerations for the TMP on page 3-100 of the
TMF Reference Manual.
0 through 8. (If the
system has fewer than
8 processors, the
upper limit is the
number of processors.)
8 through 128 MB
1 through 100
30 seconds through
5 minutes
Default Program File Name
$SYSTEM.SYSnn.TMFDR
$SYSTEM.SYSnn.TMFDR
$SYSTEM.SYSnn.TMFDR
$SYSTEM.SYSnn.TMFBOUT
$SYSTEM.SYSnn.TMFCTLG
$SYSTEM.SYSnn.TMFFRCV
$SYSTEM.SYSnn.TMFFRLS
$SYSTEM.SYSnn.TMFDR
$SYSTEM.SYSnn.TMFDR
$SYSTEM.SYSnn.TMFMON2
$SYSTEM.SYSnn.TMFTMP
$SYSTEM.SYSnn.TMFVRCV
A-5
Default
1 primary and
1 backup process
0 if not needed; 1 or
more as needed
8 MB
As many as available
(up to 100)
30 seconds (at first
attempt)