HP -UX B6941-90001 Administrator's Reference Manual page 103

NOTE
ftp Agent Package Installation
This procedure uses ftp to install the agent package from the ITO
management server to a Windows NT primary or backup domain
controller that does not currently have the agent running. This type of
installation must be done at least once; it requires ftp services and one
manual step on the NT system.
Use these instructions for your first Windows NT agent package
installation, or if you need to create an installation server in a domain
that does not give administrative rights to the HP ITO account on an
installation server in another domain.
If an installation server is already available, and you want to install ITO
agent software on additional Windows NT nodes, see "Standard Agent
Package Installation" on page 106.
1. Check the "Installation Requirements" on page 101. Make sure that
your systems meet all the listed requirements.
2. Select Window: Node Bank from any submap to display the ITO
Node Bank window.
3. Select Actions: Node: Add... to display the Add Node window.
4. Fill in the following fields of the Add Node window:
• Label: enter the name of the node as it will appear in the ITO
Node bank. In this example ntserver is used.
• Hostname: enter the complete hostname of the Windows NT
domain controller that you want to set up as the Windows NT
installation server. This example will use the hostname:
ntserver.com
ITO will look up and verify the IP Address, as well as the Net
Type, Machine Type and OS name. Look at this information to
ensure that the OS name is Windows NT.
• As User: This can be the administrator, or even anonymous if the
ftp server allows it
If SNMP services are not running on the Windows NT node, ITO cannot
detect the OS name, Net type, etc. In this case, select Windows NT and
continue with the installation.
5. Click [Advanced Options] to display the Node Advanced
Options window; the fields below are unique to Windows NT nodes:
Chapter 2
Installing ITO Agents on the Managed Nodes
General Installation Tips for Managed Nodes
. After entering this name and pressing return,
103