Installation Tips For Aix Managed Nodes Running Sp2/Hacmp - HP -UX B6941-90001 Administrator's Reference Manual

NOTE
Installing ITO Agents on the Managed Nodes
General Installation Tips for Managed Nodes
Do not check [Force Update] otherwise the management server will
re-install the agent.
If the agent is pre-installed on the node, the management server will
activate the node, and install the selected components.
Note that if the agent software is not pre-installed, this action will
install the agent.
4. Execute the following command to verify that the Control, Message,
and Action Agents are all running on the managed node:
/opt/OV/bin/OpC/opcragt -status <node>
Tips for DCE on AIX 4.1 and 4.2
To run snmpd at boot time, uncomment the line:
#start /usr/sbin/snmpd "$src_running"
in the file /etc/rc.tcpip.
Even though the rpcd daemon does not exist on AIX 4, the SMIT
utility erroneously tries to run it in the option entitled Restart RPC
Daemons in the local machine. Start the dced daemon instead, using
the script /etc/rc.dce or the SMIT option Restart the DCE/DFS
Daemons.
Problems Caused by Missing OS Patches for AIX
Sometimes the ITO agent de-installation procedure on AIX 4.1
systems does not return freed disk space when ITO is removed from
the systems. If the 'df' output does not reflect the freed disk space,
reboot the machine and check free disk space on /usr with 'df -k
/usr'.
Installation Tips for AIX Managed Nodes
Running SP2/HACMP
This section includes important information about installing ITO agents
on nodes running HACMP. General installation tips for AIX also apply to
AIX nodes running HACMP. This section is organized as follows:
• ITO Agents in the HACMP environment
• Installation Prerequisites for AIX HACMP Agents
56 Chapter 2