File Tree Layout On Hp-Ux 10.X And 11.X Managed Nodes; Nfs Cluster Servers On Hp-Ux 10.X - HP -UX B6941-90001 Administrator's Reference Manual

Figure 3-4
lib
nls
<lang>
NOTE
File Tree Layout on HP-UX 10.x and 11.x
Managed Nodes
The ITO software on HP-UX 10.x and 11.x managed nodes is organized
in the following way:
ITO Software on HP-UX 10.x and 11.x Managed Nodes
/opt/OV
bin
OpC
install
utils
If HP OpenView NNM is also installed on the managed node, only those
directories displayed in bold-face type are created by ITO.
On the management server (which also acts as a managed node) the
software trees shown above is combined with the management server file
tree at installation. For a diagram of the management server file tree,
see the HP OpenView IT/Operations Installation Guide for the
Management Server.

NFS Cluster Servers on HP-UX 10.x

In an NFS diskless environment, each cluster client has its own private
root directory containing files and directories that are private to that
client. The cluster client can access its operating system components on
the cluster server using direct NFS mounts to the shared root directory.
NFS diskless clusters are not supported on HP-UX 11.x
Chapter 3
File Tree Layouts on the Managed-Node Platforms

File Tree Layout on HP-UX 10.x and 11.x Managed Nodes

conf
include
OpC
bin
/var/opt/OV
log
tmp
OpC
OpC
conf
B
bin
OpC
B
125