HP -UX B6941-90001 Administrator's Reference Manual page 42

Prerequisites for Installing ITO Agent Software
Managed Node Requirements
Operating System. For the supported OS versions, see Table 1-1 on
page 31.
NCS version 1.5.1 or DCE RPC. If neither NCS nor DCE are found on
the managed node, ITO installs llbd and lb_admin during the ITO
agent software installation.
ARPA/Berkeley Services.
The MIB monitoring functionality of ITO requires the snmpd of the
HP OpenView platform, or SNMP-based, MIB-I (RFC 1156) or MIB-II
(RFC1158) compliant agent software.
Software Requirements for Windows NT Managed
Nodes
The following software must be installed on Windows NT managed
nodes:
Required Service Packs:
• Windows NT 3.51: Service Pack 5
• Windows NT 4.0: Service Pack 3 or 4
Operating system: for the supported OS versions, see Table 1-1 on
page 31.
FTP Service running (required during "ftp Agent Package" type
installation)
Schedule Service must not be disabled (required during installation)
TCP/IP services running and automatically started
RPC Services running (Server, Remote Procedure Call Service) and
automatically started
Event Log and SNMP Services (if discovery and other SNMP features
of ITO should be used)
The DHCP (dynamic address service for Windows NT clients) must
not be used, since ITO relies on the IP address to identify the
managed nodes.
42 Chapter 1