File Tree Layout On Olivetti Unix Managed Nodes; Standalone Systems Or Nfs Cluster Servers On Olivetti Unix - HP -UX B6941-90001 Administrator's Reference Manual

Figure 3-10
locale
<lang>
LC_MESSAGES
NOTE
File Tree Layout on Olivetti UNIX
Managed Nodes
The ITO software on Olivetti UNIX managed nodes is based on the
typical SVR4 platforms as follows:
ITO Software on Olivetti UNIX Managed Nodes
/opt/OV
bin lib
OpC
install
Standalone Systems or NFS Cluster Servers
on Olivetti UNIX
In general, standalone systems are treated as cluster servers.
The cluster server exports the /opt file system with read-only
permissions. ITO software is located on the /opt/OV path, with the
same logical and physical path names.
By default, Olivetti UNIX does not export the /opt file system. You can
enable ITO cluster operations manually by exporting the /opt file
system to one Olivetti UNIX system, and then mount it from other
Olivetti UNIX systems. You must set up the cluster manually before the
ITO installation process, so that it is available for the ITO installation.
Chapter 3
File Tree Layouts on the Managed-Node Platforms

File Tree Layout on Olivetti UNIX Managed Nodes

conf
include
OpC
bin
utils
/var/opt/OV
log
tmp
OpC
OpC
conf
B
bin
OpC
B
135