HP -UX B6941-90001 Administrator's Reference Manual page 364

Table 9-3
Agent File
Name
actagtp/
actagtq
monagtq/
monagtp
mpicmap/
mpicmaq
mpimap/
mpimaq
msgagtdf
msgagtp/
msgagtq
msgip/msgiq
opcecap/
opcecaq
pids
An Overview of ITO Processes
Understanding ITO Processes
Pipes and Queue Files on the Managed node
Queue/pipe for pending action requests for the action agent
filled by the message agent and the control agent. The
action agent polls the queue every 5 seconds.
Queue on UNIX systems between ITO monitor command
opcmon(1) respectively ITO monitor API opcmon(3) and
monitor agent. The monitor agent checks the queue after
the termination of the triggered monitor scripts/programs or
at least every 15 seconds, if externally monitored objects are
configured.
Queue/pipe used by the message agent and message-stream-
interfaces to transfer control sequences for message handling
via the MSI.
Queue/pipe used by the message agent and message-stream-
interfaces to transfer messages from MSI programs to the
message agent
File that holds any messages that cannot be passed to the
management server (for example, if the network is down). The
messages will be read from this file once the management
server is available.
Queue/pipe for local buffering of messages which have to be
sent to the message receiver when the management server
is not accessible.
Queue (only on UNIX systems) between ITO message
command opcmsg(1) or ITO message API opcmsg(3) and
ITO message interceptor.
Queue/pipe to pass messages from the message agent to the
event correlation agent
Process IDs of ITO agents controlled by the control agent.
364
File Contents and Function
Chapter 9