HP -UX B6941-90001 Administrator's Reference Manual page 321

Management server on hp-ux
Table of Contents

Advertisement

a. As administrator:
Log out and log in again to use this OV Service, click on a node and
select one of the menu items in the IP Map under
Performance:Network Activity or
Configuration:Network Configuration.
Copy this OV Service into an operator's Application Desktop
to enable the operator to monitor the IP tables.
b. As operator:
(Re-)start your session, click on a node and select one of the menu
items under Performance:Network Activity or
Configuration:Network Configuration.
Integrating the RPM Performance Tools
ITO provides preconfigured elements to integrate the HP RPM
performance tools: MeasureWare Agent, PerfView, and GlancePlus. The
following preconfigured elements are provided in the application group
Performance:
Start PerfView
This application enables you to graph performance data on the
selected managed node(s). This application runs on the management
server and requires that HP PerfView is installed on the management
server.
Start Glance
This application starts HP GlancePlus on the managed node. This
requires that HP GlancePlus is first installed on the managed node.
In addition, ITO allows you to receive alarms from HP MeasureWare
Agents. As performance data is collected by the MeasureWare agent, it is
compared with the alarm conditions specified in the MeasureWare alarm
definitions file to determine whether the conditions have been met.
When an alarm condition is met, an alarm is generated and a message is
sent to the ITO agent. The ITO agent then forwards the alarm to the ITO
user(s) responsible for performance messages. The user may select a
performance alarm and then click on the [Perform Action] button in
the Message Browser to cause PerfView to run locally and graph the
MeasureWare metrics relating to the specific alarm to examine the
relevant metrics.
Chapter 7
Integrating Applications into ITO
Integrating Applications into ITO
321

Advertisement

Table of Contents
loading

This manual is also suitable for:

Openview it

Table of Contents