HP -UX B6941-90001 Administrator's Reference Manual page 207

NOTE
Command issued: itodiag.exe /processes
Default user: HP ITO account.
Reports for the ITO Operators
This group contains the following reports that can be started as an
application by the ITO operators:
Active Message
All Active Details
All Active Messages
All History Messages
All Pending Messages
History Message
OpC Error Report
Pending Message
System Administration Manager (SAM) — Motif and
ASCII (HP-UX)
ITO can start the ASCII or Motif version of the SAM user interface on
HP-UX systems. Note that the Motif interface is only available on
HP-UX versions 9.0 and higher.
Motif SAM
Command issued: sam
Default user: root (user must be root!)
Default password: none required, because application is started via
the ITO action agent.
If the default user has been changed by the operator, you must supply a
password.
ASCII SAM
Command issued: sam
Default user: root (user must be root!)
Default password: none configured.
Chapter 5
Configuring ITO
Preconfigured Elements
207