HP -UX B6941-90001 Administrator's Reference Manual page 81

• Exit Installation immediately exits the procedure.
b. Select the Install HP IT/Operation Agent for NetWare
4.x option and respond to the prompts.
c. Enter the name of the ITO management server.
d. Enter the IP address of the ITO management server.
e. Specify whether you want the name and IP address of the
management server added to the SYS:/ETC/HOSTS.
f. Decide whether you want to use NDS or proceed in bindery mode.
If you answer No, the installation proceeds in bindery mode.
If you answer Yes, you are prompted to log into NDS. Enter the
distinguished login name in the format:
.cn=admin.ou=<organizational_unit>.o=<organization>
For example: .cn=admin.ou=ITO.o=hp
The distinguished login name is made up of the full path from the
root of the directory tree.
g. Schedule a shutdown of the NetWare servers to take place after
the installation. This is optional.
If you have selected this option, the installation procedure asks for
the date and time of the shutdown; the format of the date and time
string is MM–DD–YYYY hh:mm:ss.
Note that you can choose to shut down NetWare SFT III servers.
The systems will be shut down, but cannot be restarted
automatically.
h. Log into NDS or bindery mode depending on what you have
chosen above.
i. A list of all available NetWare servers is displayed; this list has
the following additional options:
• Select all NetWare servers
• Unselect all NetWare servers
You can browse the list, select all, deselect all, or individually
select some NetWare servers; the selected servers in the list are
indicated by a checkmark.
Chapter 2
Installing ITO Agents on the Managed Nodes
General Installation Tips for Managed Nodes
81