HP -UX B6941-90001 Administrator's Reference Manual page 73

where <my job-stream facility> for example, is Maestro's
mstream.
If there is no entry for ITO in SYSSTART.PUB.SYS, the automatic
software installation will insert an entry for ITO in
SYSSTART.PUB.SYS where the major parts look like this:
comment ...
<customer-defined stream-facility>
OPCSTRTJ.BIN.OVOPC
The executable library, SNMPXL.NET.SYS, must be available, and
ITO must have execution rights; if not, the ITO Monitoring Agent will
not operate.
The TIMEZONE variable must be set to correct differences between
the different time resources used by ITO's C-routines and MPE's
intrinsics and commands; if not, messages and error and trace logfiles
receive the wrong creation time stamp. This can cause problems when
working with multiple management servers.
Insert the following call at a global location, for example the logon
UDC or SYSSTART.PUB.SYS:
call: setvar TZ,"TIMEZONE"
Required MPE/iX Patches
Patch MPEKXE5A must be installed on all MPE/iX 5.5 systems. This
patch adds routines to the system SL.PUB.SYS that the console
interceptor requires to operate. This patch may be incorporated into
future MPE Power Patch releases.
Patch MPEKXE5B must be installed on all MPE/iX 6.0 systems. This
patch adds routines to the system SL.PUB.SYS that the console
interceptor requires to operate. This patch may be incorporated into
future MPE Power Patch releases.
Patch ITOED07A must be installed on all MPE/iX 6.0 systems. This
patch provides routines to the XL.PUB.SYS to allow the ITO agent to
call various NCS routines. This patch may become unnecessary for
future MPE agent versions.
Chapter 2
Installing ITO Agents on the Managed Nodes
General Installation Tips for Managed Nodes
OperationsCenter
73