The Ito Default Operator On Hp-Ux 10.X And 11.X; System Resources Adapted By Ito On Hp-Ux 10.X And 11.X - HP -UX B6941-90001 Administrator's Reference Manual

The ITO Default Operator on HP-UX 10.x and
11.x
The ITO default operator, opc_op, owns /home/opc_op as home
directory. By default, the operator uses the Korn Shell (/usr/bin/ksh)
and is not allowed to log into the system directory (a * entry is made for
the password in /etc/passwd).
If the managed node is a Network-Information-Service (NIS or NIS+)
client, you must add the ITO default operator opc_op on the NIS server
before installing the ITO software on a managed node. This ensures that
the ITO default operator opc_op is used by ITO and is consistent on all
systems.
System Resources Adapted by ITO on HP-UX
10.x and 11.x
ITO makes changes in the following system resource files:
/etc/passwd - entry for the default ITO operator
/etc/group - entry for the default ITO operator
/sbin/init.d/opcagt - ITO startup/shutdown script
/etc/rc.config.d/opcagt - ITO startup/shutdown configuration
script
/sbin/rc3.d - file S941opcagt created
/sbin/rc2.d - file K59opcagt created
Note that if you are working with Network Information Services (NIS or
NIS+) you should adapt the user registration accordingly.
Chapter 3
File Tree Layouts on the Managed-Node Platforms
File Tree Layout on HP-UX 10.x and 11.x Managed Nodes
127