Os/2 Applications - HP -UX B6941-90001 Administrator's Reference Manual

NOTE
Table 5-11
This application requires only the remote console password (which may
be different from the opc_op password).
For NetWare SFT III servers, add another XCONSOLE application
which calls the primary IO Engine rather than the MS Engine as in the
default XCONSOLE application.
The user name for the Xconsole application is xconsole. This is not a
NetWare user name and is only present in the ITO database as a
warning that the password for the remote console access may be
different to the user opc_op's password.

OS/2 Applications

Table 5-11, "OS/2 Applications," on page 233 lists and defines the default
applications in the OS/2 Applications window in the ITO
Application Bank.
OS/2 Applications
Application
Check Filesystem
Repair Filesystem
Reboot Node
Chapter 5
Command
OS/2 native command
CHKDSK.EXE
OS/2 native command
CHKDSK.EXE
Reboots the OS/2 system;
os2boot.exe
requires OS/2 native utility
setboot.exe.
Configuring ITO
Preconfigured Elements
Description
233