Show Drivers
This application lists all drivers that are present on the selected
Windows NT node.
Default:
itomserv.exe /list d
User Configurable Parameters: see
"Show Services" on page 221
Description of Values Returned:
True name of the service. If you wish to perform actions
NAME
on the service, this is the name that should be used.
Description of the service, this is the name that is
DISPLAY
normally seen when working with the control panel.
The status of a service can be, Started (i.e., Running),
STATUS
Paused, or Stopped (represented by a blank entry).
The startup type of a service can be:
STARTUP
Automatic,
boot, or system Service starts every time the system
Manual
Disabled
Show Services
This application returns a list of the services that are configured on the
selected Windows NT system. If the ITO user does not have the rights to
obtain information about a service, "NA" will be returned for the service
details.
Default:
itomserv.exe /list s
User Configurable Parameters:
/start <servicename>
/stop <servicename>
/pause <servicename>
/continue <servicename>
Chapter 5
Preconfigured Elements
starts.
Service can be started by a user or a
dependent service.
Service cannot be started.
Start service <servicename>
Stop service <servicename>
Pause service <servicename>
Continue service <servicename>
Configuring ITO
221